American Journal of Engineering Research and Reviews


Analysis and research on new mechanical characteristics of narrow base steel tube tower for transmission line

Research Article of American Journal of Engineering Research and Reviews Analysis and research on new mechanical characteristics of narrow base steel tube tower for transmission line Yunsheng Xu* and Chunyan Li Department of mechanical engineering, North China Electric Power University, Baoding 071000, Hebei Compared with the common angle steel tower, the narrow base steel pipe tower has the advantages of simple structure, beautiful appearance, small floor area and better coordination with the urban environment. In the construction of urban high pressure transmission line, the narrow base tower has its own unique advantages and wide application prospects. It has the advantages of ordinary iron tower processing, transportation, assembly, cost saving, small occupancy of single column steel pipe rod, small line corridor and beautiful beauty. In the optimization design of the narrow tower, how to take the wind vibration coefficient of the tower, how to consider the bending moment of the rod end, the design of the narrow base tower and the structure optimization of the narrow tower tower are all the problems to be solved urgently. In this paper, the modal analysis of a single tower is carried out to determine its vibration mode, and then the wind vibration coefficient of a narrow tower is analyzed. Finally, the influence of x and y direction vibration on the frequency of the tower is obtained. Keywords: Transmission line; Narrow base tower; Frequency; Vibration mode ...

Analysis and Assessment of Agulu-Nnaka Erosion Impact on Human Lives and Infrastructure

Research Article of American Journal of Engineering Research and Reviews Analysis and Assessment of Agulu-Nnaka Erosion Impact on Human Lives and Infrastructure OTTI, V. I and EKENTA, D. E Civil Engineering Department,Nnamdi Azikiwe University,Awka The aim of this study was to rehabilitate the gully erosion site and reduce longer term erosion vulnerability in Agulu/Nanka Community. This activity was carried out through some civil works such as construction of concrete drainage system, culverts and silty basin, spikes, rock chutes and stabilization of gully. An engineering design was used for the erosion gully intervention which highlighted on the detailed civil works that were carried out. An environmental and social management plan study was implemented aimed at identifying potential and social impacts that were associated with the rehabilitation as proposed means of minimizing and mitigating them to acceptable level. Keywords: Agulu-Nnaka Erosion Impact, Human Lives and Infrastructure ...

Tribo evaluation of Surface Treated Carbon Fiber Reinforced Friction Material

Research Article of American Journal of Engineering Research and Reviews Tribo evaluation of Surface Treated Carbon Fiber Reinforced Friction Material Naresh Kumar Konada 1*, K.N.S.Suman 2 1* Department of Mechanical Engineering , Anits Engineering College,Visakhapatnam, INDIA 2 Department of Mechanical Engineering , Andhra University College of Engineering,Visakhapatnam, INDIA Carbon fiber reinforced friction material is formulated by grafting MWCNT-F on its surface. This material combination is investigated in this work by using a wear test apparatus. The surface of CF is chemically inert and hydrophobic in nature and possesses poor bonding strength with polymer matrix. Hence, an attempt is made to improve the bonding behaviour between CF and remaining ingredients. CF surface is modified by grafting multi walled carbon nano tubes functionalized (MWCNT-F) on CF surface. CF content after surface modification is varied in wt% (2%, 3%, 4% and 5%) and mixed with remaining ingredients of friction material. Composite sheets are prepared by using hand layup method. Multi walled Carbon Nano Tubes grafted friction material (MWCRFM), is characterized for SEM. MWCNTs-F on CF surface is observed. Sample specimens are cut from the friction composite sheets and the influence of performance properties like friction, wear, speed, load and time on friction is studied. The behaviour of the samples are also analyzed using regression analysis L9 (3x3) experimental design method for 3 different loads, time periods and speeds. The results reveal that, time and braking pressure plays an important role to control the wear rate and coefficient of friction of the composite. It was also observed that, MWCNT-F grafted on CF specimens for sample M5 (CF 5 wt%) possess less wear rate and high stable coefficient of friction compare to other formulations of materials. Keywords: Multi walled carbon nano tubes, Carbon fibers, Chemical grafting, and Tribological properties ...

Thin Film Diamond For Optical Applications

Research Article of American Journal of Engineering Research and Reviews Thin Film Diamond For Optical Applications Mohammad Abdul Razak1 and Sheikh Irfan Samad1 1College of electrical engineering, Universiti Malaya, Malaysia Diamond is a unique material with robust mechanical properties, the electrical and the optical properties of the thin film diamond can be altered as they are deposited using microwave plasma enhanced chemical vapor deposition (MPCVD) method. The thin film diamond can be used both as optical window for certain wavelengths of light and as a reflector, based on the thickness and the deposition parameters of the thin film diamond. In this paper, we are illustrating a 1 µm thin film diamond that we were able to deposit, pattern and etch selectively using standard microfabrication techniques. This patterning of diamond film allows us to create 3D structures using single crystal diamond. Keywords: crystalline diamond, amorphous diamond, retroreflector, optical, MPCVD ...

Dr. Harish Nagar
Associate Professor, School of Basic and Applied Sciences, Sangam University

Dr. HASAN DİLBAS
Yildiz Technical University Civil Engineering Faculty Civil Engineering Department Construction Materials Division

Dr. Suat SARIDEMİR
Associate Professor, Düzce University, Faculty of Technology, Department of Mechanical and Manufacturing Engineering

Dr. Klodian Gumeni
Tirana Polytechnic University

Dr. Rifat Reşatoğlu
Assistant Professor, Near East University

Dr. Parveen Sharma
Assistant Professor, School of Mechanical Engineering, Lovely Professional University

Dr. Klodian Dhoska
Engineering School, Canadian Institute of Technology, Zayed Center, Rr. Andon Zako Çajupi,Tirana, Albania

Dr. ABHISHEK SHUKLA
Assistant Professor, R.D. Engineering College Technical Campus, Ghaziabad

Dr Viraj H Mankar
Assistant Professor, Lovely Professional University

Dr. Menderes KAM
Assistant Professor, Düzce University, Dr. Engin PAK Cumayeri Vocational School, Department of Machinery and Metal Technology

Dr. Turgay KIVAK
Associate Professor, Duzce University

Dr. Praveen Kumar Sharma
Associate Professor, Department of Chemistry, Lovely Professional University

Dr. Er. Sitesh Kumar Singh
Assistant Professor and Head, Department of Civil Engineering, Career Point University

Dr. Eng.Ahmed Kadhim Hussein
Assistant Professor, Department of Mechanical Engineering, College of Engineering, University of Babylon

Dr. Kuntal Barua
Assistant Professor, Computer Science & Engineering, SANGAM UNIVERSITY

Dr. Rajeev Rathi
Assistant Professor, School of Mechanical Engineering, Lovely Professional University

Dr. Mustafa DURSUN
Assistant Professor, Teknoloji Fakültesi Elektrik-Elektronik Müh. Düzce Üniversitesi

Dr. Fuat KARA
Assistant Professor, Department of Mechanical and Manufacturing Engineering, Faculty of Technology, University of Duzce

Dr.T.Ramakrishnan
Assistant Professor, Department of Mechanical Engineering, Sri Eshwar college of Engineering

Dr. Engin NAS
Associate Professor, Duzce University

Dr. Denis Askushaj
Department of Physics Engineering, Faculty of Mathematics Engineering and Physics Engineering, Polytechnic University of Tirana, Albania

Please check current guidelines for authors before you submit your manuscripts.

Manuscript Title: The title should be a brief phrase.

Author Information: List full names and affiliation of all authors, including Emails and phone numbers of corresponding author.

Abstract: The abstract should be less than 500 words. Following abstract, a list of keywords and abbreviations should be added. The keywords should be no more than 10. Abbreviation are only used for non standard and long terms.

Introduction: The introduction should included a clear statement of current problems.

Materials and Methods: This section should be clearly described.

Results and discussion: Authors may put results and discussion into a single section or show them separately.

Acknowledgement: This section includes a brief acknowledgment of people, grant details, funds

References: References should be listed in a numbered citation order at the end of the manuscript. DOIs and links to referenced articles should be added if available. Abstracts and talks for conferences or papers not yet accepted should not be cited. Examples Published Papers: 

1. Avinaba Mukherjee, Sourav Sikdar, Anisur Rahman Khuda-Bukhsh. Evaluation of ameliorative potential of isolated flavonol fractions from Thuja occidentalis in lung cancer cells and in Benzo(a) pyrene induced lung toxicity in mice. International Journal of Traditional and Complementary Medicine, 2016; 1(1): 0001-0013. 
2. Vikas Gupta, Parveen Bansal, Junaid Niazi, Kamlesh Kohli, Pankaj Ghaiye. Anti-anxiety Activity of Citrus paradisi var. duncan Extracts in Swiss Albino Mice-A Preclinical Study. Journal of Herbal Medicine Research, 2016; 1(1): 0001-0006.

Tables and figures: Tables should be used at a minimum with a short descriptive title. The preferred file formats for Figures/Graphics are GIF, TIFF, JPEG or PowerPoint.

Proofs and Reprints: A proof will be sent to the corresponding author before publication. Authors should carefully read the proof to avoid any errors and return the proof to the editorial office. Editorial office will publish the article in journal’s website in eSciPub publisher and send a notice to authors with the links of the paper.

Non-Disclosure Agreement: All authors who published papers in any journals of eSciPub LLC must accept Non-Disclosure Agreement.

Open Access
American Journal of Engineering Research and Reviews is a journal publishing research manuscripts, review articles, case reports, editorials, and letters to the editor in Engineering Research (Indexing details).

Peer Review
To ensure the quality of the publications, all submitted manuscripts will be peer-reviewed by invited experts in the field. The decisions of editors will be made based on the comments of the reviewers.

Rapid Publication
Time to first decision: within 2 days for initial decision without review, 18 days with review; Time to publication: Accepted articles will be published online within 2 days, and final corrected versions by authors will be accessible within 5 days.

Rapid Response Team
Please feel free to contact our rapid response team if you have any questions about eSciPub. Our customer representative will answer your questions soon.

American Journal of Engineering Research and Reviews

Loading